7 Best concrete sealers of 2017! For [Driveway] +[Garage] +[Interior]
№1 – Rocklinite Labs Tuff Duck
Why did this concrete sealer win the first place?
Because this food safe concrete sealer works great and can be used by beginners.
№2 – Quikrete Concrete Crack Seal
Why did this concrete sealer come in second place?
Because it is an affordable and quality sealer, but it clogs the spout in two or three days, so you have to spend it as fast as you can.
№3 – Rust-Oleum Concrete Sealer Spray
Why did this concrete sealer take third place?
Because it is good for small cracks, but you would have to use at least three coats for more serious issues.
Attention! Don’t buy any concrete sealers until you read the FAQ!
What types of concrete sealers are there?
There are four types of concrete sealers:
- Penetrating sealers (good protection against moisture);
- Acrylics (create a thin protective film);
- Polyurethanes (create a thick durable film, twice as thick as acrylic products);
- Epoxies (create the thickest protection film).
What type of roller to use for concrete sealer?
Choosy any paint-type roller you like. I think that 3/4-inch nap roller is the best choice for most types of work.
What is the difference between concrete sealer and waterproofer?
Both concreate sealers and waterproofer are used for similar purposes. The difference is that sealers generally create protective films over concrete surfaces, while waterproofers penetrate into the cracks and filling the gaps.
Can you use concrete sealer on sandstone?
Yes, you can use any translucent concreate sealer you like.
How much concrete sealer do I need?
You need to measure the overall square footage of your project and divide the result by the coverage rate of the chosen concrete sealer (usually it is about 250 square feet per gallon). You will get the approximate amount of product you need.
What is the best concrete sealer for pool deck?
This is the most popular concreate sealer for pool deck – I have used it with many of my clients:
How long does concrete sealer need to dry?
It depends on the type of the concrete sealer. Penetrating ones completely dry in 24 hours, while topical sealers (acrylic, polyurethane and epoxy) take up to two days to fully dry.
What concrete sealers are better – solvent vs water based?
Water based sealers have low gloss levels and they do not darken the surface as much their solvent-based counterparts do.
What concrete sealer to use for radon reducing?
You can solve problems with radon coming through the concrete by using specially designed sealers. RadonSeal is a good choice – it penetrates deep into concrete and significantly lowers radon level.
What is the best concrete sealer for tile?
This is my favorite concrete sealer for tiled surfaces:
Can I use linseed oil as concrete sealer?
Yes, it is an acceptable option if you are desperately trying to save money. Boiled linseed oil effectively seals moisture and makes concrete harder, but it has a strong smell.
How to use concrete sealer after pressure washing?
You do not need to do anything special. Wait until concrete completely dries off after pressure washing and apply sealer with a paint roller.
How to apply concrete sealer with a roller?
First of all, prepare the concrete surface. Clean it – it is better to use a vacuum cleaner and then proceed cleaning with warm soapy water. Let the surface fully dry, put on rubber gloves and breathing mask and pour concreate sealer into a paint try or a bucket. Finally, take your paint roller and start applying the sealer with broad even strokes.
How to apply concrete sealer with sprayer?
It is very easy. Prepare the surface just like you would do with a paint roller, and then lightly and evenly spray the sealer from joint to joint. While spraying, always keep the sprayer about 10 inches above the surface.
What concrete sealer is the best for driveways?
This is my favorite concrete sealer for exterior works:
Can concrete sealer be used on wood?
No, you should not use concrete sealer on wooden surfaces. It will not seal the wood, but it will most likely discolor it. Use specifically designed wood sealers instead.
Why does concrete sealer bubble?
There are many possible reasons. The sealer may be bubbling because of entrapped air due to overly dynamic application or just because of over application. Bubbles also may appear during the application of a new coat of sealer because of expanding air.
How to fix concrete sealer bubbles?
If you are using solvent-based sealer, you can remove blisters and by wetting the surface with acetone. Small bubbles can be removed by applying an additional coat of the same sealer. And, of course, if nothing else helps, you can strip the surface of all sealer, clean it and they reapply sealer.
How to apply concrete sealer on a driveway?
Clean the concrete first (remove dirt, mud, leaves and other debris), rinse it with pressure washer and allow it to dry. Apply the sealer with the chosen tool (sprayer, brush or paint roller – I recommend the last) and wait for 24-48 hours (depending on the type of sealer) until it dries.
What is the best concrete sealer for stamped concrete?
This is a good sealer, which is made specifically for stamped concrete surfaces:
How to remove concrete sealer from garage floor?
Be ready for a long and exhausting job. Removing concrete sealer is much harder than applying it – it requires hours of elbow grease. You can use mechanical method, which includes grinding, sanding or blasting the coating off the concrete, or chemical method by using a sealer removal.
What is the best concrete sealer for garage floor?
I would say that Wet Look Natural Stone Sealer is the best one. It is inexpensive, easy to use and the result is always positive.
What are the benefits of sealing concrete patio?
Properly sealed concrete patio will keep the perfect looks for many years. Concrete sealer makes patio look better, keeps it from fading due to ultraviolet exposure and protects it from stains.
How long does concrete sealer last?
Lifespan depends on the type of sealer. Reactive chemical sealers last for 10 years or even longer. Epoxy and urethane sealers last up to ten years (the exact time depends on traffic exposure). Acrylic-resin sealers last from one to three years.
What roller should I use for concrete sealer?
Here is a good set of waterproofed paint rollers:
Can concrete sealer be tinted?
Of course. There are hundreds of pretinted concrete sealer that you can use for colored surfaces or just to revitalize old or discolored concrete.
Can concrete sealer freeze?
Yes, interior sealer applied outdoors may freeze and destroy during cold winters. You should use special outdoor concrete sealers in order to prevent that.
Can you use concrete sealer on brick?
Yes. Some manufacturer offer universal sealers, that work equally well on concrete and brick surfaces. “Wet Look” sealer from Black Diamond Stoneworks is a great example.
Sealing concrete surfaces is a great way to make them more resistant to weather exposure, humidity, grease, oil and abrasion. Moreover, sealer improves the appearance of concrete and makes it is much easier to clean.
Applying sealer is not that hard, so even beginners are able to do it on their own. You can choose any product from my recommendation list to save time. If you have zero experience in construction – simply follow my tips, properly prepare the surface and apply the sealer according to instructions. The result will pleasantly surprise you!
So, TOP3 of concrete sealers:
- №1 — Rocklinite Labs Tuff Duck
- №2 — Quikrete Concrete Crack Seal
- №3 — Rust-Oleum Concrete Sealer Spray
Sealer for pool deck:
Concrete sealer for tile:
Sealer for exterior works:
Concrete sealer for stamped concrete:
Roller for concrete sealer:
by Edgar Mason | Last Updated August 1, 2017